77 02 120 H ESDElectronics Diagonal Cutter with carbide cutting edges ESD
77 02 120 H ESD
Electronics Diagonal Cutter with carbide cutting edges ESD
- For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries
- Always the right cutting tool, even with the hardest material
- Precision carbide metal cutting edges soldered into forged blanks
- Sturdy, zero-backlash box joint
- Hardness of the carbide cutting edges 80 – 83 HRC
- Pliers with carbide metal cutting edges have a substantially longer service life than such with conventional cutting edges
- Constantly reliable cutting results due to the avoidance of cutter deformations
- High cost saving due to longer service life of the pliers
- Electrically discharging handles - dissipative
Technical attributes
Article No.
77 02 120 H ESD
EAN
4003773075813
Head
mirror polished
Handles
with multi-component grips
Weight
85 g
Dimensions
120 x 50 x 19 mm
Standard
DIN ISO 9654 DIN EN 61 340-5
REACH compliant
does not contain SVHC
RoHS compliant
not applicable
Cutting capacities medium hard wire (diameter)
Ø 1.4 mm
Schneidwerte harter Draht (Durchmesser)
Ø 1.0 mm
Cutting capacities piano wire (diameter)
Ø 0.6 mm
Cutting capacities soft wire (diameter)
Ø 2 mm
Jaw length (B)
14 mm
Jaw thickness (joint) (D)
7.5 mm
Head width (A)
11 mm
ESD
yes
Brief overview
Comp. Diagonal cutter w/ ESD protection for uses such as aerospace industry.
Inset carbide cutting edges with a hardness of 80–83 HRC
Cutting values: soft Ø2.0, medium-hard Ø1.4 mm, hard Ø1.0 mm, piano Ø0.6 mm
Box joint
Mirror polish plus fine oil film protect against rust
Forged, oil-hardened with special quality special tool steel
Handles w/ ESD multi-component grips
Length 120mm; Net weight 85 g
