78 13 125 Electronic Super Knips®
- With lead catcher - no uncontrolled loss of cut wire ends
- Cutting edge hardness approx. 54 HRC
- INOX tool steel
- Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
- Ground, very sharp cutting edges without bevel
- Precisely shaped tips cut wires close to a surface from Ø 0.2 mm
- Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life
- Joint with stainless steel rivet
- Extremely smooth movement for minimum operator fatigue
- With opening spring and opening limiter
Cut abutting, fine wire accurately – hold wire sections securely
Extremely sharp cutting edges made of stainless, air-hardened INOX steel
The Knipex Electronic Super Knips is made from surgical steel (INOX steel). The cutting edges are ground without bevel and hardened to approx. 54 HRC for flush cutting
Accurately cut fine wires, e.g. that are touching enclosures and components, thanks to precision tips.
Work involving dexterity: low weight, smooth operation and wire clamp
Great dexterity is needed when working on electronic components and in precision mechanics. Due to its frictionless handle spring, the Knipex Electronic Super Knips 78 13 125 is so smooth-running that energy can be metered out very precisely – with dexterity.
Opening springs and opening restrictor further simplify work. The integrated wire clamp prevents wire sections from springing back in an uncontrolled manner: a safety aspect, particularly when cutting wires in enclosures containing electronic assemblies.
A special detail ensures an accurate cut and long service life
These precision pliers have been designed so that the user is able to concentrate completely on his work, also when working continuously, without the need to consider the tool.
One special detail permits the most precise shear cuts on even the thinnest of wire, and at the same time gives the pliers a long service life: the extremely sharp cutting edges on the Electronic Super Knips 78 13 125 are protected against bumping into each other after cutting by the micro cutting edge misalignment. It is therefore clear that these pliers with their multi-component grips will sit comfortably in the hand for a long time.
Precision pliers for the finest cutting work in electronics and precision engineering: shear cut with controlled micro cutting edge misalignment
Thanks to precisely shaped tips, also cut abutting wires accurately as from Ø 0.2 mm
Cutting capacity of soft wire up to 1.6 Ø mm; medium-hard wire up to 1.0 Ø mm
Very smooth operating thanks to frictionless handle spring
Low weight (57 g)
Production in accordance with the highest standards for optimal work results and a long service life
Made from stainless surgical steel (INOX)
Wire clamp holds wire sections on the pliers, preventing them from springing back
Cutting edge hardness approx. 54 HRC
Knipex Electronic Super Knips 78 13 125: high level of safety and quality
The Knipex Electronic Super Knips is used for the finest cutting work in electronics and precision mechanics. Radio technicians, industrial electricians, mechatronics engineers and electronics engineers, for example, place great value on optimal working results. The following arguments speak in favour of these precision pliers: their free movement, low weight, the wire clamp, the excellent cutting precision and long tool life, among other things thanks to the micro cutting edge misalignment. These benefits are the visible results of decades of experience in toolmaking, constant product development and the commitment by Knipex towards the highest quality standards: from material selection and processing through to finishing.