72 01 140Diagonal Cutters for plastics
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Compact diagonal cutters for plastic and other soft materials
Why special diagonal cutters for plastic are necessary
The cutting edges of diagonal cutters used for wire are ground to produce a wedge-shaped cut towards the centre of the cut product. This wedge ultimately splits the cut material apart, and the wire ends separated in this way have wedge-shaped cut surfaces. A flush, smooth cut is desired when separating moulded parts and sprues, however, in order to create as little finishing work as possible when deburring. Diagonal cutters used here must not have any bevel towards the component to create a straight cut surface. The Knipex 72 01 140 diagonal cutters have been specially developed for plastics and other soft materials. Their cutting edges are surface ground.
For flush deburring after injection moulding
The Knipex 72 01 140 diagonal cutters are used when moulded parts need to be mechanically separated from sprue after demoulding. Their surface ground cutting faces produce a clean, flush separation. The sprue is cut off directly on the moulded part, because the cutting edge runs flat on the component.
With opening spring to relieve strain on the user – compact and stable
In many cases, work steps in production processes such as plastic injection moulding repeat. Users who frequently separate sprues from moulded parts therefore appreciate the opening spring on the 72 01 140. At 140 mm long and weighing 125 g, the Knipex diagonal cutters for plastics are pleasantly compact – but still stable. We forge the 72 01 140 diagonal cutters from vanadium electric steel and give them high strength by heating and then quenching them in oil.
Compact diagonal cutters for plastic and soft materials such as lead
For the smooth, flush cutting of sprue as arises during injection moulding
Surface ground cutting edges (no bevel)
Handles coated with non-slip plastic
Vanadium electric steel, forged, oil hardened
Head with precision finish
140 mm long
Net weight 125 g
Knipex diagonal cutters for plastic and soft materials
One can see how good diagonal cutters are by the cut. This also applies when cutting plastic.
In addition to the quality forged parts made from vanadium electric steel, the most important quality criteria at Knipex include the accurate machining of the tool steel manufactured in Germany.
The material is cut flush using the surface ground cutting edges. Thanks to their long tool life, Knipex diagonal cutters for plastic continuously deliver accurate cuts.