35 12 115 ESDElectronics Pliers ESD
- Precision pliers for fine assembly work, e. g. in electronics and fine mechanics
- For gripping, holding and bending
- Electrically discharging handles - dissipative
- Sturdy, zero backlash box joint
- Smooth ground gripping surfaces
- Edges carefully deburred
- Low-friction double spring for gentle and even opening
- The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools
Small, slender with ESD protection: gripping pliers for sensitive electronics
Short, smooth and good: 115 mm long for plenty of freedom of movement even where space is restricted
The Knipex 35 12 115 ESD electronics pliers are a compact tool that can also be used well when working in poorly accessible areas: ideal for electronic equipment, printed circuit boards and precision constructions, e.g. in measuring equipment and delicate apparatus. Space is usually quite tight here.
With a length of just 115 mm and their slim, flat head, these electronics pliers from Knipex are the ideal tool for the delicate gripping, holding and bending of sensitive components. The gripping surfaces are smooth ground to protect sensitive surfaces.
Smooth operating and accurate, with box joint design and double spring
Great challenges are placed on pliers whose principal task is gripping, holding and bending small and sensitive components. Outer handle guided on both sides, ensuring precise running without any tilting effect. The low friction double spring supports the gentle opening of the pliers.
ESD protection from uncontrolled electrostatic discharge; safety rust protection
Sudden discharge resulting from electrostatic charging differences is a concern especially in electronics. With the Knipex 35 12 115 ESD electronics pliers, the electrostatic energy is discharged in a constant, controlled manner continuously via the conductive handles. This avoids high potential differences between component and tool. There is no sudden discharge. The rust protection is also safe for sensitive electronic components. There is no chrome-plating, therefore no pieces of chrome can peel off and fall onto printed circuit boards. The mirror polish in conjunction with a fine oil film provides perfectly adequate corrosion protection for the pliers during workshop use, if the oil film is replaced occasionally.
Slender gripping pliers for delicate installation work in precision engineering and electronics
Ideal for precision engineering and electronics – ESD protection
For gripping, holding and bending
Stable thanks to box joint with zero backlash
Low friction double spring for gentle and steady opening
Smooth ground gripping surfaces
Pliers mirror-polished with a fine oil film as rust protection
Handles discharge electrostatic energy in a constant and controlled (dissipative) manner
ESD protection in accordance with valid standards such as IEC TR 61 340-5, DIN EN 61 340-5, SP Method 2472
Length 115 mm
Net weight 74 g
ESD – electrostatic discharge
With these pliers, electrostatic energy is discharged in a controlled manner via the handles. This protects components at risk from electrostatic discharge.
Protection from mechanical damage
Sensitive plastic plug connections can be gently gripped.
Assemble printed circuit boards with precision
The Knipex 35 12 115 ESD is a valuable support when feeding sensitive components.
