64 11 115Electronics End Cutting Nipper
- Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
- Sturdy, zero backlash box joint
- Low-friction double spring for gentle and even opening
- The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools
- Cutting edges additionally laser-hardened, cutting edge hardness approx. 56 HRC
- End Cutter, without bevel
Cut fine wire and cable flush, vertically to surfaces
Cutting vertically and so from the front
Unlike with diagonal cutters, where the cutting edges are a relatively straight extension of the handle, the cutting edges on end cutting nippers are at right angles to the handles. This permits work that is vertical to surfaces from which wire, cable or components are protruding. In tight spaces, e.g. on printed circuit boards, cutting is often best done from above. There is good leverage thanks to the short pliers head, so that power delivery to the cutting edges and the measuring of manual force are both excellent. As the Knipex 64 11 115 electronics end cutting nippers have no external bevel, flush cutting is also possible. Due to their design, these end cutting nippers are not suitable for cutting hard wire, but only soft and medium-hard wire.
Sophisticated design – designed for ergonomics and durability
The box joint on the end cutting nippers from Knipex is smooth operating and with zero backlash. Box joints are characterised by the fact that the inner handle is guided on both sides by two extensive bearing surfaces in the outer handle. This prevents the tilting movements which are typical with lap joints, and has a positive effect on the quality of cutting processes and tool life. In addition to oil hardening of the entire pliers, the cutting edges are induction hardened to at least 56 HRC. The low friction double spring is an advantage ergonomically. It produces a gentle, steady opening after cutting.
High Knipex quality standards and safety rust protection
The Knipex 64 11 115 end cutting nippers have a mirror polish and a fine oil film as corrosion resistance instead of chrome-plating. With occasional re-oiling of the surface, this rust protection is completely sufficient for workshop operation. As a result, for safety reasons these electronics pliers are also ideal for sensitive electronics environments. There are no pieces of chrome that could peel off and damage circuits. The quality machining of the pliers meets the requirements present in electronics and micromechanics: precision, function and reliability are at the top of the list.
Electronics pliers for the finest cutting work e.g. in electronics and precision engineering
Cutting capacities: medium-hard wire Ø 0.8 mm, soft wire Ø 1.4 mm; due to their design, not suitable for hard wire
Precision box joint; low friction double spring
Mirror polish and a fine oil film as rust protection (no chrome, to prevent any damage to circuits caused by peeling pieces of chrome)
High-grade special tool steel, forged, oil-hardened
Cutting edges additionally induction hardened, cutting edge hardness at least 56 HRC
Handles coated with non-slip plastic
Net weight 74 g
Knipex End cutting nippers – precision for electronics and precision engineering
Knipex offers an extensive range of end cutting nippers for applications in electronics and precision engineering. They are characterised by high precision and functionality – and the long life that Knipex stands for.
Those who use tools a lot and professionally every day expect a quality that permits simple and safe work and which lasts for many years of hard use. These electronic end cutting nippers are forged from quality materials, carefully machined and heat treated.
Every pair of Knipex pliers represents more than 130 years of specialist know-how.