fbpx Produkte | Knipex Skip to main content
Loading YT Video
Knipex
Quality — Made in Germany

Elinstallation

70 06 160
160 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
70 06 180
180 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
73 06 160
160 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
74 06 200
200 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
16 95 01 SB
135 mm
Ø 8,0 – 13,0 mm
16 80 125 SB
125 mm
Ø 8,0 – 13,0 mm
13 86 200
200 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
Ø 15 mm / 50 mm²
13 96 200
200 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
Ø 15 mm / 50 mm²
26 16 200
200 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
26 26 200
200 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
95 16 165
165 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
Ø 15 mm / 50 mm²
95 16 200
200 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
Ø 20 mm / 70 mm²
95 36 280
280 mm
atramentiserad / lackerad / polerad
Flerkomponentsgrepp
Ø 52 mm / 380 mm²
12 42 195
195 mm
utan handtagshylsor
0,03 – 10,0 mm²
12 40 200
200 mm
utan handtagshylsor
0,03 – 10,0 mm²
97 53 04
180 mm
atramentiserad / lackerad / polerad
Flerkomponentsgrepp
0,08 – 10 + 16 mm²
97 53 09
190 mm
Flerkomponentsgrepp
0,08 – 10 + 16 mm²
97 53 14
180 mm
atramentiserad / lackerad / polerad
Flerkomponentsgrepp
0,08 – 10 mm²
97 53 18
200 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
0,14 – 16 mm²
97 33 02
250 mm
atramentiserad / lackerad / polerad
Flerkomponentsgrepp
0,5 – 6,0 mm²
97 52 36
220 mm
atramentiserad / lackerad / polerad
Flerkomponentsgrepp
0,5 – 6,0 mm²
97 52 38
220 mm
atramentiserad / lackerad / polerad
Flerkomponentsgrepp
0,25 – 6,0 mm²
87 01 250
250 mm
atramentiserad / lackerad / polerad
med plastöverdra
71 22 200
200 mm
atramentiserad / lackerad / polerad
Flerkomponentsgrepp
Ø 5,2 mm
86 05 150
150 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
87 01 400
400 mm
med plastöverdra
88 06 250
250 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
1 1/2" / 36 mm
97 55 04
180 mm
förkromad / galvaniserad / förnicklad
Flerkomponentsgrepp
0,08 – 10 + 16 mm²
97 62 145 A
145 mm
Flerkomponentsgrepp
0,25 – 2,5 mm²
97 68 145 A
145 mm
Flerkomponentsgrepp
0,25 – 2,5 mm²
00 11 V50
23 mm
Ø 12 mm

Where good tools become a matter of trust

Download

Which pliers are electrical pliers?

Compared to most crafts, work on electrical systems has different requirements. Wherever electricity can flow, it is not just precise movements that count – but above all, very special efforts to protect the health of the electrician.

 

This is why the complex insulation is a special characteristic of electrical pliers.

 

There is just no way around carefully tested and high-quality tools such as those from KNIPEX. (see also: VDE pliers and ESD pliers )

 

Features of VDE pliers

The abbreviation VDE stands for the German "Association of Electrical Engineering, Electronics and Information Technology". The focus of this registered association is the development of VDE standards for the manufacture of tools . Since electricians are regularly exposed to possibly mortal dangers in their daily work, strict regulations with regard to an adequate insulation are essential.

 

The VDE also maintains a renowned testing institute. Products tested here by independent specialists feature the triangular VDE logo which certifies high quality and suitability for use. Although the “GS” mark given here to a new tool signals “tested safety”, every tool should be checked regularly for any damage that may occur in everyday work. After all, even a tiny cut or tear in the insulation can lead to the worst possible consequences.

 

But it is not only the topic of safety that presents developers of excellent electricians' tools with challenges. Precise crimping, stripping or cutting in particularly narrow working environments is only possible if the tool allows it. Small dimensions and special spring mechanisms are therefore extremely important in order to give electrical professionals the necessary scope and the greatest possible sensitivity.

 

 

Pliers for the electrical industry

The quality of a hand tool for electrical installation is primarily determined by whether it is possible to work precisely in the tightest of spaces. Slim handles and pliers heads are just as important as designs that provide sensitivity right up to the gripping jaws.

 

Compliance with special standards must also be guaranteed, for example by using VDE pliers. Relevant electrical tools include:

 

Gripping pliers such as flat-nose pliers and needle-nose pliers

The short and flat gripping jaws of flat-nose pliers have a roughened gripping surface, which makes it possible to securely grip and hold different workpieces. When the gripping surfaces taper towards the front, we speak of needle-nose pliers. Their special design helps you to reach through small openings.

 

Flat-nose pliers : The wide, roughened gripping jaws for greater holding force characterise flat-nose pliers. In the electrical sector they are used for holding and guiding for example cables, plugs and system parts.

Needle-nose pliers : With the pointed, roughened gripping jaws, needle-nose pliers can be used through small openings. They are also often used to bend wires.

 

 

Cutting pliers

Side cutters, electronic front cutters and electronic oblique cutters are considered indispensable classics. They are used to disconnect cables and cut connectors.

 

Compression tools

When it comes to making electrical connections, crimping tools offer a practical alternative to welding and soldering. Crimping is a special pressing technique in which plug contacts and cables are connected to one another by plastic deformation. Different versions of crimping dies are aimed at different pairings of plugs and cables.

 

The wire stripper: The wire stripper makes it possible to cut and remove cable insulations of different cross-sections. They are available with round, straight or V-shaped cutting openings, and as mechanical or automatic models. The main goal when using it is not to damage the stranded wires or wires behind it.