12 12 02 Precision Insulation Stripper With adapted blades
- With additional cable guide for exact positioning of the cable in the stripping area of the blade
- Form-fit stripping of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber; multi-layer too
- A second pair of blades holds the remaining insulation reliably in place
- Replaceable shaped blade adapted precisely to the respective conductor cross-section
- With length stop for constant stripping length during repetitive work
- Blade: special tool steel, oil-hardened
- Pliers body: steel
Precision-wire strippers for special insulation materials
Two pairs of blades: division of labour for the desired result
The Knipex 12 12 02 wire strippers have been specially developed for very tough and hard insulation materials which need to almost be cut through entirely so that they can be pulled off. Two pairs of blades cut into the entire circumference of the cable insulation. The blades have been shaped and ground so that the cut gets very close to the conductor. After scoring, one of the pairs of blades remains still and secures the insulation that has been cut into. The other pair of blades strips the insulation from the cable.
With adjustable length stop for consistent wire stripping lengths in series production work
Length stop for reproducible stripping results
"The insulation involved here must withstand a great deal, such as being heat-resistant and tough. Cutting insulation like this from the single conductors during stripping is equally challenging. With conventional wire stripping tools it is difficult and often quite impossible to achieve a clean wire stripping result. With these special wire strippers, by contrast, even hard to remove insulation is removed accurately and reliably, and in a single work step. The model 12 12 02 shown here has an additional insertion aid for precisely positioning the cable on the wire stripping points of the blade. Other Knipex precision wire strippers from this series can be found in the table below."
Insert cable, press pliers closed – cable is stripped
The work saved by these wire strippers is immense. After inserting the cable, the entire wire stripping process takes place as if by itself with one press of the hand. Even insulation materials that are difficult to process are reliably removed with precise and, thanks to the length stop, accurate repeat measurements: an advantage for fitters, e.g. in the areas of energy technology, plant and automotive engineering
Two pairs of blades cut parallel into the insulation, and remove it with a separating movement
Wire stripping capacities 0.03-0.09 / 0.14 / 0.38 / 0.57 / 1.0 / 1.5 / 2.08 mm²
Handles with multi-component grips
Length stop that can be easily adjusted by pressing and sliding for accurately repeated wire stripping
Spare set of blade available
Net weight 447 g
Knipex precision wire strippers with adapted blades
They offer good everyday benefits, even with non-everyday insulation materials that are difficult to strip.
The great benefits of the tools and their safe, comfortable use are the results of decades of experience making pliers, continuous development and Knipex’s commitment to high quality standards.
Pliers from Knipex are built for many years of use in a professional environment.
Length stop and cable routing
Cable routing for the precise positioning of the cable; easily adjustable length stop for accurately repeated wire stripping.
Four-blade principle: step 1
Two pairs of blades cut into the entire circumference of the hard, tough insulation with a circular cut.
Four-blade principle: step 2
One pair of blades (in the left-hand picture) holds the remaining part of the insulation tight, while the second removes the part to be stripped.
Circular cut for tough, hard insulation materials
Two blades cut right round the PTFE, silicone, Radox, Kapton and rubber insulation for ideal results.