-
Screwdriver for slotted screws
-
Stripping Knives, with guide shoe
-
Cable Knives
-
Screwdrivers for cross-recessed screws, Phillips®
-
Screwdrivers (Slim) for slotted screws
-
Self-Clamping Slip-On Caps, conical
-
Nut Drivers, with screwdriver handle
-
Open-End Wrenches
-
Insulating clamps, plastic
-
Screwdrivers for cross-recessed screws, Pozidriv®
-
Electricians' Gloves
-
Plastic Slip-On Caps, conical
-
Insulating Mats, from rubber
-
Hexagon Sockets for hexagonal screws, for internal square 3/8" or 1/2"
-
Cable Knives, with replaceable blade
-
Box Wrenches
-
Screwdrivers for Torx® screws
-
Screwdrivers for hexagon socket screws
-
Screwdrivers (Slim) Plus/Minus, Pozidriv®
-
Screwdrivers (Slim) for cross-recessed screws, Pozidriv®
-
Screwdrivers (Slim) for cross-recessed screws, Phillips®
-
Extension Bars, with internal and driving square 3/8" or 1/2"
-
Nut Drivers, with T-handle
-
PUK® Junior Hacksaw
-
Screwdrivers (Slim) Plus/Minus, Phillips®
-
Adjustable Wrench
-
Torque Wrenches, with driving square, reversible
-
Reversible Ratchets, with driving square 3/8" or 1/2"
-
Screwdrivers for hexagon socket screws, with T-handle
-
Screwdrivers for Robertson screws
-
Hexagon Sockets for hexagonal socket screws, for internal square 3/8" or 1/2"
-
T-handle, with driving square 3/8" or 1/2"
-
Tool Roll
-
Toolbox "BIG Twin Move RED" Electric Competence
-
Standard Tool Case, 26 parts, with insulated tools for works on electrical installations
-
Reversible Ratchet, with driving square 1/2"
-
Stand Mats, from rubber
-
Toolbox "BIG Twin Move RED" Electric Competence, empty
-
Compact Tool Case, 17 parts, with insulated tools for works on electrical installations
-
Sockets for Torx screws, with internal square 3/8"
-
Combination Pliers, Chrome Vanadium
-
High Leverage Combination Pliers
-
Combination Pliers
-
Needle-Nose Combination Pliers
-
Insulation Strippers, universal
-
Stripping Pliers
-
KNIPEX StriX®, Insulation strippers with cable shears
-
Pliers for Electrical Installation
-
Diagonal Insulation Strippers
-
Flat Nose Pliers
-
Round Nose Pliers
-
Snipe Nose Side Cutting Pliers, (Radio Pliers)
-
Snipe Nose Side Cutting Pliers, (Stork Beak Pliers)
-
Long Nose Pliers
-
Diagonal Cutters
-
KNIPEX X-Cut®, Compact Diagonal Cutters, high lever transmission
-
High Leverage Diagonal Cutters
-
KNIPEX Cobra® VDE, High-Tech Water Pump Pliers
-
KNIPEX Alligator®, Water Pump Pliers
-
Cable Shears, handles extrusion plastic-coated
-
Cable Shears
-
Cable Shears, with twin cutting edge
-
Cable Shears, for two-hand operation
-
Cable Cutters, (ratchet action), for steel wire armoured cables (SWA cable)
-
Cable Shears, for two-handed use, short construction
-
Cable Cutters, (ratchet action)
-
Cable Cutters, (ratchet principle, 3-stage)
-
Wire Rope and ACSR-Cable Cutters
-
Crimping Pliers for wire ferrules, with trapezoid crimp
-
Crimping Pliers for wire ferrules, with mandrel crimp
-
Plastic Snipe Nose Pliers, insulating
Insulated Tools
70 06 160
Diagonal Cutter
Length: 160 mm
Grips: multi-component grips
13 96 200
Pliers for Electrical Installation
Length: 200 mm
Grips: multi-component grips
Ø 15 mm / 50 mm²
74 06 200
High Leverage Diagonal Cutter
Length: 200 mm
Grips: multi-component grips
88 06 250
KNIPEX Alligator®
Water Pump Pliers
Length: 250 mm
Grips: multi-component grips
1 1/2" / 36 mm
97 68 145 A
Crimping Pliers for wire ferrules
Length: 145 mm
Grips: multi-component grips
0,25 – 2,5 mm²
98 07 250
Adjustable Wrench
Length: 260 mm
Grips: with dipped insulation
34 mm
98 99 15 LE
Tool Case "BIG Twin Move RED"
Empty
13 66 180
KNIPEX StriX®
Insulation strippers with cable shears
Length: 180 mm
Grips: multi-component grips
Ø 15 mm / 50 mm²
13 66 180 T
KNIPEX StriX®
Insulation strippers with cable shears
Length: 180 mm
Grips: multi-component grips
Ø 15 mm / 50 mm²
13 96 200 T
Pliers for Electrical Installation
Length: 200 mm
Grips: multi-component grips
Ø 15 mm / 50 mm²
73 06 160 T
KNIPEX X-Cut®
Compact Diagonal Cutter
Length: 160 mm
Grips: multi-component grips
98 66 60
Self-Clamping Slip-On Cap
Length: 140 mm
98 99 15
Toolbox "BIG Twin Move RED" Electric Competence
74 06 200 T
High Leverage Diagonal Cutter
Length: 200 mm
Grips: multi-component grips
74 06 250 T
High Leverage Diagonal Cutter
Length: 250 mm
Grips: multi-component grips
87 26 250 T
KNIPEX Cobra® VDE
High-Tech Water Pump Pliers, insulated
Length: 250 mm
Grips: multi-component grips
95 16 165 T
Cable Shears
Length: 165 mm
Grips: multi-component grips
Ø 15 mm / 50 mm²
70 06 160 T
Diagonal Cutter
Length: 160 mm
Grips: multi-component grips
03 06 180 T
Combination Pliers
Length: 180 mm
Grips: multi-component grips
08 26 145 T
Needle-Nose Combination Pliers
Length: 145 mm
Grips: multi-component grips
11 06 160 T
Insulation Stripper
With opening spring, universal
Length: 160 mm
Grips: multi-component grips
Ø 5,0 mm / 10,0 mm²
70 06 180
Diagonal Cutter
Length: 180 mm
Grips: multi-component grips
70 07 180
Diagonal Cutter
Length: 180 mm
Grips: with dipped insulation
70 07 160
Diagonal Cutter
Length: 160 mm
Grips: with dipped insulation
70 26 160
Diagonal Cutter
Length: 160 mm
Grips: multi-component grips
70 06 125
Diagonal Cutter
Length: 125 mm
Grips: multi-component grips
73 06 160
KNIPEX X-Cut®
Compact Diagonal Cutter High lever transmission
Length: 160 mm
Grips: multi-component grips
98 15 06
Screwdriver for hexagon socket screws
With T-handle
Length: 250 mm
6,0 mm
98 15 08
Screwdriver for hexagon socket screws
With T-handle
Length: 250 mm
8,0 mm
98 24 00
Screwdriver for cross recessed screws
Phillips®
Length: 162 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PH0
98 24 01
Screwdriver for cross recessed screws
Phillips®
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PH1
98 24 02
Screwdriver for cross recessed screws
Phillips®
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PH2
98 24 03
Screwdriver for cross recessed screws
Phillips®
Length: 270 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PH3
98 24 04
Screwdriver for cross recessed screws
Phillips®
Length: 320 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PH4
98 24 01 SL
Screwdriver (Slim) for cross-recessed screws
Phillips®
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PH1
98 24 02 SL
Screwdriver (Slim) for cross-recessed screws
Phillips®
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PH2
98 25 00
Screwdriver for cross recessed screws
Pozidriv®
Length: 162 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PZ 0
98 25 01
Screwdriver for cross recessed screws
Pozidriv®
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PZ 1
98 25 02
Screwdriver for cross recessed screws
Pozidriv®
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PZ 2
98 25 03
Screwdriver for cross recessed screws
Pozidriv®
Length: 270 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
PZ 3
Insulated tools from KNIPEX
The difference between immersion insulation and VDE multi-component sleeves
There are two different types of insulation for tools at KNIPEX: the one-component handle sleeve and the multi-component sleeve.
The former is made by immersion insulation. To manufacture them, the pliers blank is dipped several times in liquid plastic.
The latter is the yellow-red multi-component sleeve, which adapts ergonomically to every hand. Both are equally insulated and tested, so you can choose the right insulated tool according to your own preferences.
Regulated according to standards and tested individually
When working on electrical systems, the quality of the tool is vital. For this reason, strict safety conditions and standards apply to tools for live work, such as DIN EN IEC 60900. This special tool must have been specially manufactured and tested for this work.
KNIPEX tools that carry the 1000 V-symbol are approved for work up to 1000 V AC.
In order to ensure that the special insulation actually withstands the voltages, each tool is subjected to a breakdown test with 10,000 V AC before it leaves the KNIPEX plant. This gives you a reassuring safety buffer when working up to 1000 V.
In addition, the insulation is also checked in special temperature conditions, at 70 °C and -25 °C, as well as under tensile and impact force. In addition to the internal testing system, external institutes and test centers such as the VDE guarantee that all KNIPEX tools actually meet the applicable VDE criteria.
