-
Screwdriver for slotted screws
-
Stripping Knife
-
Cable Knives
-
Screwdrivers for cross-recessed screws, Phillips®
-
Screwdrivers (Slim) for slotted screws
-
Self-Clamping Slip-On Caps, conical
-
Nut Drivers, with screwdriver handle
-
Open-End Wrenches
-
Insulating clamps, plastic
-
Screwdrivers for cross-recessed screws, Pozidriv®
-
Electricians' Gloves
-
Plastic Slip-On Caps, conical
-
Cover cloths, from rubber
-
Hexagon Sockets for hexagonal screws, for internal square 3/8" or 1/2"
-
Cable Knives, with replaceable blade
-
Box Wrenches
-
Screwdrivers for Torx® screws
-
Screwdrivers for hexagon socket screws
-
12-Point Sockets, for internal square 3/8" or 1/2"
-
Screwdrivers (Slim) Plus/Minus, Pozidriv®
-
Screwdrivers (Slim) for cross-recessed screws, Pozidriv®
-
Screwdrivers (Slim) for cross-recessed screws, Phillips®
-
Extension Bars, with internal and driving square 3/8" or 1/2"
-
Nut Drivers, with T-handle
-
PUK® Junior Hacksaw
-
Screwdrivers (Slim) Plus/Minus, Phillips®
-
Adjustable Wrench
-
Torque Wrenches, with driving square, reversible
-
Reversible Ratchets, with driving square 3/8" or 1/2"
-
Screwdrivers for hexagon socket screws, with T-handle
-
Screwdrivers for Robertson screws
-
Hexagon Sockets for hexagonal socket screws, for internal square 3/8" or 1/2"
-
T-handle, with driving square 3/8" or 1/2"
-
Tool Roll
-
Toolbox "BIG Twin Move RED" Electric Competence
-
Compact Tool Case, 26 parts, with insulated tools for works on electrical installations
-
Reversible Ratchet, with driving square 1/2"
-
Stand Mats, from rubber
-
Toolbox "BIG Twin Move RED" Electric Competence, empty
-
Compact Tool Case, 17 parts, with insulated tools for works on electrical installations
-
Sockets for Torx® screws, with internal square 3/8"
-
Combination Pliers, Chrome Vanadium
-
High Leverage Combination Pliers
-
Combination Pliers
-
Needle-Nose Combination Pliers
-
Insulation Strippers, universal
-
Stripping Pliers
-
KNIPEX StriX®, Insulation strippers with cable shears
-
Pliers for Electrical Installation, Multi-Tool for Electricians
-
Diagonal Insulation Strippers
-
Flat Nose Pliers
-
Round Nose Pliers
-
Snipe Nose Side Cutting Pliers, (Radio Pliers)
-
Snipe Nose Side Cutting Pliers, (Stork Beak Pliers)
-
Long Nose Pliers
-
Diagonal Cutters
-
KNIPEX X-Cut®, Compact Diagonal Cutters, high lever transmission
-
High Leverage Diagonal Cutters
-
KNIPEX Cobra® VDE, High-Tech Water Pump Pliers
-
KNIPEX Alligator®, Water Pump Pliers
-
Cable Shears, handles extrusion plastic-coated
-
Cable Shears
-
Cable Shears, with twin cutting edge
-
Cable Shears, for two-hand operation
-
Cable Cutters, (ratchet action), for steel wire armoured cables (SWA cable)
-
Cable Shears, for two-hand operation
-
Cable Cutters, (ratchet action)
-
Cable Cutters, (ratchet principle, 3-stage)
-
Wire Rope and ACSR-Cable Cutters
-
Crimping Pliers for wire ferrules, with trapezoid crimp
-
Crimping Pliers for wire ferrules, with mandrel crimp
-
Plastic Snipe Nose Pliers, insulating
Insulated Tools
Learn more about Insulated Tools
98 26 30
Screwdrivers for Torx® screws
Length: 210 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 10
Screwdrivers for slotted screws
Length: 320 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 25
Screwdrivers for slotted screws
Length: 177 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 30
Screwdrivers for slotted screws
Length: 202 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 35
Screwdrivers for slotted screws
Length: 202 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 40
Screwdrivers for slotted screws
Length: 202 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 55
Screwdrivers for slotted screws
Length: 232 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 65
Screwdrivers for slotted screws
Length: 262 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 80
Screwdrivers for slotted screws
Length: 295 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 21 45
Screwdrivers for slotted screws
Length: 287 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 35 SL
Screwdriver (Slim) for slotted screws
Length: 202 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 40 SL
Screwdriver (Slim) for slotted screws
Length: 202 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 55 SL
Screwdriver (Slim) for slotted screws
Length: 232 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 20 65 SL
Screwdriver (Slim) for slotted screws
Length: 262 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 00 07
Open-end wrench
98 00 08
Open-end wrench
98 00 09
Open-end wrench
73 06 160
KNIPEX X-Cut®
Compact Diagonal Cutter High lever transmission
Length: 160 mm
Surface:
chrome-plated / zinc-plated
Grips: multi-component grips
74 06 160
High Leverage Diagonal Cutter
Length: 160 mm
Surface:
chrome-plated / zinc-plated
Grips: multi-component grips
74 06 180
High Leverage Diagonal Cutter
Length: 180 mm
Surface:
chrome-plated / zinc-plated
Grips: multi-component grips
74 06 250
High Leverage Diagonal Cutter
Length: 250 mm
Surface:
chrome-plated / zinc-plated
Grips: multi-component grips
74 07 200
High Leverage Diagonal Cutter
Length: 200 mm
Surface:
chrome-plated / zinc-plated
Grips: with dipped insulation
74 07 250
High Leverage Diagonal Cutter
Length: 250 mm
Surface:
chrome-plated / zinc-plated
Grips: with dipped insulation
95 36 315 A
Cable Cutter
(ratchet action) For steel wire armoured cables (SWA cable)
Length: 315 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
95 36 320
Cable Cutter
(ratchet principle, 3-stage)
Length: 320 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 33 25
Torque Wrench
With driving square, reversible
Length: 290 mm
98 33 50
Torque Wrench
With driving square, reversible
Length: 385 mm
98 43 50
Torque Wrench
With driving square, reversible
Length: 385 mm
98 99 15 LE
Tool Case "BIG Twin Move RED"
Empty
Length: 290 mm
98 66 60
Self-Clamping Slip-On Cap
Length: 140 mm
98 99 15
Toolbox "BIG Twin Move RED" Electric Competence
42 parts
Length: 290 mm
98 13 20
Screwdriver for hexagon socket screws
Length: 175 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 13 25
Screwdriver for hexagon socket screws
Length: 177 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 13 30
Screwdriver for hexagon socket screws
Length: 182 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 13 40
Screwdriver for hexagon socket screws
Length: 182 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 13 50
Screwdriver for hexagon socket screws
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 13 60
Screwdriver for hexagon socket screws
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 14 05
Screwdriver for hexagon socket screws
With T-handle
Length: 120 mm
98 14 06
Screwdriver for hexagon socket screws
With T-handle
Length: 120 mm
98 14 08
Screwdriver for hexagon socket screws
With T-handle
Length: 120 mm
Insulated tools from KNIPEX
The difference between immersion insulation and VDE multi-component sleeves
There are two different types of insulation for tools at KNIPEX: the one-component handle sleeve and the multi-component sleeve.
The former is made by immersion insulation. To manufacture them, the pliers blank is dipped several times in liquid plastic.
The latter is the yellow-red multi-component sleeve, which adapts ergonomically to every hand. Both are equally insulated and tested, so you can choose the right insulated tool according to your own preferences.
Regulated according to standards and tested individually
When working on electrical systems, the quality of the tool is vital. For this reason, strict safety conditions and standards apply to tools for live work, such as DIN EN IEC 60900. This special tool must have been specially manufactured and tested for this work.
KNIPEX tools that carry the 1000 V-symbol are approved for work up to 1000 V AC.
In order to ensure that the special insulation actually withstands the voltages, each tool is subjected to a breakdown test with 10,000 V AC before it leaves the KNIPEX plant. This gives you a reassuring safety buffer when working up to 1000 V.
In addition, the insulation is also checked in special temperature conditions, at 70 °C and -25 °C, as well as under tensile and impact force. In addition to the internal testing system, external institutes and test centers such as the VDE guarantee that all KNIPEX tools actually meet the applicable VDE criteria.
