-
Screwdriver for slotted screws
-
Stripping Knife
-
Cable Knives
-
Screwdrivers for cross-recessed screws, Phillips®
-
Screwdrivers (Slim) for slotted screws
-
Self-Clamping Slip-On Caps, conical
-
Nut Drivers, with screwdriver handle
-
Open-End Wrenches
-
Insulating clamps, plastic
-
Screwdrivers for cross-recessed screws, Pozidriv®
-
Electricians' Gloves
-
Plastic Slip-On Caps, conical
-
Cover cloths, from rubber
-
Hexagon Sockets for hexagonal screws, for internal square 3/8" or 1/2"
-
Cable Knives, with replaceable blade
-
Box Wrenches
-
Screwdrivers for Torx® screws
-
Screwdrivers for hexagon socket screws
-
12-Point Sockets, for internal square 3/8" or 1/2"
-
Screwdrivers (Slim) Plus/Minus, Pozidriv®
-
Screwdrivers (Slim) for cross-recessed screws, Pozidriv®
-
Screwdrivers (Slim) for cross-recessed screws, Phillips®
-
Extension Bars, with internal and driving square 3/8" or 1/2"
-
Nut Drivers, with T-handle
-
PUK® Junior Hacksaw
-
Screwdrivers (Slim) Plus/Minus, Phillips®
-
Adjustable Wrench
-
Torque Wrenches, with driving square, reversible
-
Reversible Ratchets, with driving square 3/8" or 1/2"
-
Screwdrivers for hexagon socket screws, with T-handle
-
Screwdrivers for Robertson screws
-
Hexagon Sockets for hexagonal socket screws, for internal square 3/8" or 1/2"
-
T-handle, with driving square 3/8" or 1/2"
-
Tool Roll
-
Toolbox "BIG Twin Move RED" Electric Competence
-
Compact Tool Case, 26 parts, with insulated tools for works on electrical installations
-
Reversible Ratchet, with driving square 1/2"
-
Stand Mats, from rubber
-
Toolbox "BIG Twin Move RED" Electric Competence, empty
-
Compact Tool Case, 17 parts, with insulated tools for works on electrical installations
-
Sockets for Torx® screws, with internal square 3/8"
-
Combination Pliers, Chrome Vanadium
-
High Leverage Combination Pliers
-
Combination Pliers
-
Needle-Nose Combination Pliers
-
Insulation Strippers, universal
-
Stripping Pliers
-
KNIPEX StriX®, Insulation strippers with cable shears
-
Pliers for Electrical Installation, Multi-Tool for Electricians
-
Diagonal Insulation Strippers
-
Flat Nose Pliers
-
Round Nose Pliers
-
Snipe Nose Side Cutting Pliers, (Radio Pliers)
-
Snipe Nose Side Cutting Pliers, (Stork Beak Pliers)
-
Long Nose Pliers
-
Diagonal Cutters
-
KNIPEX X-Cut®, Compact Diagonal Cutters, high lever transmission
-
High Leverage Diagonal Cutters
-
KNIPEX Cobra® VDE, High-Tech Water Pump Pliers
-
KNIPEX Alligator®, Water Pump Pliers
-
Cable Shears, handles extrusion plastic-coated
-
Cable Shears
-
Cable Shears, with twin cutting edge
-
Cable Shears, for two-hand operation
-
Cable Cutters, (ratchet action), for steel wire armoured cables (SWA cable)
-
Cable Shears, for two-hand operation
-
Cable Cutters, (ratchet action)
-
Cable Cutters, (ratchet principle, 3-stage)
-
Wire Rope and ACSR-Cable Cutters
-
Crimping Pliers for wire ferrules, with trapezoid crimp
-
Crimping Pliers for wire ferrules, with mandrel crimp
-
Plastic Snipe Nose Pliers, insulating
Insulated Tools
Learn more about Insulated Tools
98 01 11
Box Wrench
98 01 12
Box Wrench
98 01 13
Box Wrench
98 47 1 1/16"
12-Point Socket
With internal square 1/2"
Length: 61 mm
73 06 160 T
KNIPEX X-Cut®
Compact Diagonal Cutter
Length: 160 mm
Surface:
chrome-plated / zinc-plated
Grips: multi-component grips
74 06 200 T
High Leverage Diagonal Cutter
Length: 200 mm
Surface:
chrome-plated / zinc-plated
Grips: multi-component grips
74 06 250 T
High Leverage Diagonal Cutter
Length: 250 mm
Surface:
chrome-plated / zinc-plated
Grips: multi-component grips
87 26 250 T
KNIPEX Cobra® VDE
High-Tech Water Pump Pliers, insulated
Length: 250 mm
Surface:
chrome-plated / zinc-plated
Grips: multi-component grips
95 16 165 T
Cable Shears
Length: 165 mm
Surface:
chrome-plated / zinc-plated
Grips: multi-component grips
97 78 180 T
Crimping Pliers for wire ferrules
Length: 180 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 24 01 SLS
Screwdriver (Slim) Plus/Minus
Phillips®
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 24 02 SLS
Screwdriver (Slim) Plus/Minus
Phillips®
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 25 01 SLS
Screwdriver (Slim) Plus/Minus
Pozidriv®
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 25 02 SLS
Screwdriver (Slim) Plus/Minus
Pozidriv®
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 90
PUK® Junior Hacksaw
Length: 240 mm
98 29 30
KNIPEX Socket 3/8''
For TX30
Length: 123 mm
98 29 40
KNIPEX Socket 3/8''
For TX40
Length: 123 mm
98 29 50
KNIPEX Socket 3/8''
For TX50
Length: 117 mm
98 29 45
KNIPEX Socket 3/8''
For TX45
Length: 117 mm
98 29 25
KNIPEX Socket 3/8''
For TX25
Length: 123 mm
98 15 06
Screwdriver for hexagon socket screws
With T-handle
Length: 250 mm
98 15 08
Screwdriver for hexagon socket screws
With T-handle
Length: 250 mm
98 24 00
Screwdriver for cross recessed screws
Phillips®
Length: 162 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 24 01
Screwdriver for cross recessed screws
Phillips®
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 24 02
Screwdriver for cross recessed screws
Phillips®
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 24 03
Screwdriver for cross recessed screws
Phillips®
Length: 270 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 24 04
Screwdriver for cross recessed screws
Phillips®
Length: 320 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 24 01 SL
Screwdriver (Slim) for cross-recessed screws
Phillips®
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 24 02 SL
Screwdriver (Slim) for cross-recessed screws
Phillips®
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 25 00
Screwdriver for cross recessed screws
Pozidriv®
Length: 162 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 25 01
Screwdriver for cross recessed screws
Pozidriv®
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 25 02
Screwdriver for cross recessed screws
Pozidriv®
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 25 03
Screwdriver for cross recessed screws
Pozidriv®
Length: 270 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 25 04
Screwdriver for cross recessed screws
Pozidriv®
Length: 320 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 25 01 SL
Screwdriver (Slim) for cross-recessed screws
Pozidriv®
Length: 187 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 25 02 SL
Screwdriver (Slim) for cross-recessed screws
Pozidriv®
Length: 212 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 26 10
Screwdrivers for Torx® screws
Length: 160 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 26 15
Screwdrivers for Torx® screws
Length: 185 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 26 20
Screwdrivers for Torx® screws
Length: 185 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
98 26 25
Screwdrivers for Torx® screws
Length: 185 mm
Surface:
atramentised / lacquered / burnished
Grips: multi-component grips
Insulated tools from KNIPEX
The difference between immersion insulation and VDE multi-component sleeves
There are two different types of insulation for tools at KNIPEX: the one-component handle sleeve and the multi-component sleeve.
The former is made by immersion insulation. To manufacture them, the pliers blank is dipped several times in liquid plastic.
The latter is the yellow-red multi-component sleeve, which adapts ergonomically to every hand. Both are equally insulated and tested, so you can choose the right insulated tool according to your own preferences.
Regulated according to standards and tested individually
When working on electrical systems, the quality of the tool is vital. For this reason, strict safety conditions and standards apply to tools for live work, such as DIN EN IEC 60900. This special tool must have been specially manufactured and tested for this work.
KNIPEX tools that carry the 1000 V-symbol are approved for work up to 1000 V AC.
In order to ensure that the special insulation actually withstands the voltages, each tool is subjected to a breakdown test with 10,000 V AC before it leaves the KNIPEX plant. This gives you a reassuring safety buffer when working up to 1000 V.
In addition, the insulation is also checked in special temperature conditions, at 70 °C and -25 °C, as well as under tensile and impact force. In addition to the internal testing system, external institutes and test centers such as the VDE guarantee that all KNIPEX tools actually meet the applicable VDE criteria.
