77 32 120 HElectronics Diagonal Cutter with carbide cutting edges
77 32 120 H
Electronics Diagonal Cutter with carbide cutting edges
- Pointed head with chamfer
- With small bevel
- For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries
- Always the right cutting tool, even with the hardest material
- Precision carbide metal cutting edges soldered into forged blanks
- Sturdy, zero-backlash box joint
- Hardness of the carbide cutting edges 80 – 83 HRC
- Pliers with carbide metal cutting edges have a substantially longer service life than such with conventional cutting edges
- Constantly reliable cutting results due to the avoidance of cutter deformations
- High cost saving due to longer service life of the pliers
Technical attributes
Article No.
77 32 120 H
EAN
4003773075790
Head
mirror polished
Handles
with multi-component grips
Weight
80 g
Dimensions
120 x 50 x 19 mm
Standard
DIN ISO 9654
REACH compliant
does not contain SVHC
RoHS compliant
not applicable
Cutting capacities medium hard wire (diameter)
Ø 1.0 mm
Schneidwerte harter Draht (Durchmesser)
Ø 0.6 mm
Cutting capacities piano wire (diameter)
Ø 0.2 mm
Cutting capacities soft wire (diameter)
Ø 1.6 mm
Jaw length (B)
14 mm
Jaw thickness (joint) (D)
7.5 mm
Head width (A)
11 mm
Brief overview
Comp. Diagonal cutters for fine cutting, e.g. in electronics/precision mechan.
Cutting values: soft Ø1.6 mm, medium-hard Ø1.0 mm, hard Ø0.6 mm, piano Ø0.2 mm
Box joint
Mirror polish plus fine oil film protect against rust
Forged, oil-hardened with special quality special tool steel
Inset carbide cutting edges with a hardness of 80–83 HRC
Handles, multi-component grips
Length 120mm; Net weight 80 g
