fbpx Electronics End Cutting Nipper | Knipex Skip to main content
Loading YT Video
Knipex
Quality — Made in Germany
KNIPEX 64 22 115 Elektronik-Vornschneider
KNIPEX 64 22 115 Elektronik-Vornschneider
KNIPEX 64 22 115 Elektronik-Vornschneider
KNIPEX 64 22 115 Anwendung
KNIPEX 64 22 115 Anwendung
KNIPEX 64 22 115 Elektronik-Vornschneider
KNIPEX 64 22 115 Elektronik-Vornschneider
KNIPEX 64 22 115 Elektronik-Vornschneider
KNIPEX 64 22 115 Anwendung
KNIPEX 64 22 115 Anwendung

64 22 115 Electronics End Cutting Nipper

  • Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
  • Sturdy, zero backlash box joint
  • Low-friction double spring for gentle and even opening
  • The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools
  • Cutters additionally laser hardened, cutter hardness at least 56 HRC
  • End Cutter, mini-blade with small bevel
  • Ball bearing chrome steel, oil hardened
Technical attributes
Article No.
64 22 115
EAN
4003773017806
Head
mirror polished
Handles
with multi-component grips
weight
70 g
Dimensions
115 x 69 x 18 mm
Standard
DIN ISO 9654
Reach
no  
RohS
no  
Cutting capacities soft wire (diameter)
Ø 0.8 mm
Head width (A)
11 mm
20 mm
6 mm
Cutting edge length mm (C)
3 mm

Cut fine wire and cable vertically to surfaces

Cutting vertically to the surface and therefore from the front - also almost flush

Where space is restricted, e.g. on printed circuit boards, in many cases cutting is best done from above. Unlike with diagonal cutters, where the cutting edges are a relatively straight extension of the handle, the cutting edges on end cutting nippers are at right angles to the handles a. This makes it possible to work almost vertically to surfaces from which wires, cable or components are protruding.

The power delivery to the cutting edges and the measuring of manual force are both excellent thanks to the good leverage resulting from the short pliers head. The small bevel makes almost flush cutting possible. Due to their design, these electronics end cutting nippers are only suitable for soft wire.

Sophisticated design – designed for ergonomics and durability

These Knipex end cutting nippers have a smooth operating box joint with zero backlash. Box joints have the advantage that the inner handle is guided on both sides by two extensive bearing surfaces in the outer handle. This prevents the tilting movements which are typical with lap joints, and has a positive effect on the quality of cutting processes and tool life. In addition to oil hardening of the entire pliers, the cutting edges are induction hardened to at least 60 HRC. The low friction double spring is an advantage ergonomically. It produces a gentle, steady opening after cutting.

High Knipex quality standards and safety rust protection

Instead of chrome-plating, the Knipex 64 22 115 end cutting nippers have a mirror polish and a fine oil film as corrosion protection. With occasional re-oiling of the surface, this rust protection is completely sufficient for workshop operation. As a result, for safety reasons these electronics pliers are also ideal for sensitive electronics environments. There are no pieces of chrome that could peel off and damage circuits. The quality machining of the pliers meets the requirements present in electronics and micromechanics: precision, function and reliability are at the top of the list.

Brief overview

Electronics pliers for the finest cutting work; due to their design, only suitable for soft wire

Cutting capacity: soft wire Ø 0.8 mm

Precision box joint

High-grade special tool steel, forged, oil-hardened

Mini cutting edge with small bevel; additionally induction hardened, cutting edge hardness at least 60 HRC

Handles with multi-component grips

Net weight 65 g

Knipex End cutting nippers – precision for electronics and precision engineering

Knipex offers an extensive range of end cutting nippers for applications in electronics and precision engineering. They are characterised by high precision and functionality – and the long life that Knipex stands for.

Those who use tools a lot and professionally every day expect a quality that permits simple and safe work and which lasts for many years of hard use. These electronic end cutting nippers are forged from quality materials, carefully machined and heat treated.

Every pair of Knipex pliers represents more than 130 years of specialist know-how.

All variations

100-140 mm
mirror polished
plastic coated
100-140 mm
mirror polished
Multi-component grips
100-140 mm
mirror polished
plastic coated
100-140 mm
mirror polished
Multi-component grips
100-140 mm
mirror polished
Multi-component grips
100-140 mm
mirror polished
Multi-component grips
100-140 mm
mirror polished
Multi-component grips
100-140 mm
mirror polished
Multi-component grips
100-140 mm
mirror polished
Multi-component grips
Technical changes and errors reserved.