fbpx Crimping Pliers for wire ferrules | Knipex Skip to main content
Loading YT Video
Knipex
Quality — Made in Germany
KNIPEX 97 62 145 A Crimpzange für Aderendhülsen
KNIPEX 97 62 145 A Crimpzange für Aderendhülsen
KNIPEX 97 62 145 A Crimpzange für Aderendhülsen
KNIPEX 97 62 145 A Crimpzange für Aderendhülsen
KNIPEX 97 62 145 A Crimpzange für Aderendhülsen
KNIPEX 97 62 145 A Crimpzange für Aderendhülsen

97 62 145 A Crimping Pliers for wire ferrules

  • For crimping wire ferrules according to DIN 46228 parts 1 + 4 in the range from 0.25 up to 2.5 mm²
  • Crimping in marked trapezoidal dies for reliable connections between the sleeve and the conductor
  • Vanadium electric steel; forged, oil-hardened
Technical attributes
Article No.
97 62 145 A
EAN
4003773060154
Head
polished
Handles
with multi-component grips
Weight
170 g
Dimensions
145 x 55 x 19 mm
Reach
no  
RohS
no  
Applications
Wire ferrules
Capacity in square millimetres
0.25 — 2.5 mm²
Number of crimping positions
4
AWG
24 — 14

Effortlessly position and crimp end sleeves (ferrules) DIN 46228 parts 1 + 4

For work on control systems, in IT, on domestic electrical and electronic systems

The 97 62 145 A von Knipex crimping pliers from Knipex are a solid and accurate tool that can be used wherever end sleeves (ferrules) with a trapezoidal profile are crimped. The trapezoidal-shaped crimped end sleeves are especially suitable in the terminal strips on control systems due to the usually high and slim supports. The Knipex crimping pliers are also used in motor electronics and on domestic electrical systems, e.g. during the installation of entertainment electronics or lighting elements. With the multi-component grips, they sit comfortably in the hand.

Custom-fit alignment of the crimp profile to the crimp volume

To achieve a crimp result in line with the standard, the crimp profile must be carefully matched to the material volume of the end sleeve (ferrule) plus wires. This means that here too it is essential to have the appropriate tool. Appropriate is also the key word when selecting the right crimp die. Four crimp dies of between 0.25 and 2.5 mm² are available in total. The trapezoidal cross sections are clearly marked to ensure that the end sleeves (ferrules) are inserted correctly.

Accurate and reliable crimping

Manual force can be measured easily when crimping end sleeves (ferrules) with the 97 62 145 A crimping pliers. Once the correct crimp die has been selected, after crimping the end sleeve sits permanently and securely on the conductor.

Brief overview

Forged crimping pliers for crimping end sleeves (ferrules) in accordance with DIN 46228 Parts 1 + 4 in the capacity range of from 0.25 to 2.5 mm²

145 mm long

Net weight 170 g

Manufactured from vanadium electric steel, oil-hardened

Polished pliers head

Handles with multi-component grips

Crimping pliers from Knipex: good quality for maximum durability

Crimping pliers for end sleeves (ferrules) from the Knipex range impress with their smooth-running and optimum transmission ratio. Crimping is easy. The Knipex crimping pliers are manufactured on modern machinery using vanadium electric steel, and are then oil-hardened. The safe use and great benefits of the tools are the results of decades of toolmaking experience, constant product development and the commitment by Knipex towards high quality standards.

All variations

141-180 mm
plastic coated
0,25 – 2,5 mm²
141-180 mm
plastic coated
0,25 – 2,5 mm²
141-180 mm
Multi-component grips
0,25 – 2,5 mm²
Technical changes and errors reserved.