97 52 08Crimping PliersFor two-hand operation
- For solder-free electrical connections
- The ingenious lever transmission reduces the handforce up to 30% compared with regular crimping pliers
- Consistently high crimping quality due to precision dies and ratchet mechanism (unlockable)
- Tools have been set precisely (calibrated) in the factory
- Two-hand operation for easy crimping of large conductor diameters
- Easy handling as a result of well balanced centre of gravity, angled head and ergnomically shaped handles
- Crimping die is not exchangeable
Extremely user-friendly: precision requiring little time and effort
For the professional crimping of end sleeves (ferrules)
The Knipex 97 52 08 crimping pliers make the crimping of end sleeves (ferrules) simple, giving the user a tool that intuitively enables him to do everything right and creating connections that are mechanically and electrically safe and secure. Insulated and non-insulated end sleeves (ferrules) are crimped reliably to the conductors in the precision-machined crimp profiles. The ideal crimping pressure has already been set in the factory. The integral lock can be released where necessary, and the crimping pressure can be adjusted.
30 % less effort required – the leverage principle is used twice here
Up to 30 % less effort required compared to conventional crimping pliers, made possible by applied physics. The ergonomically shaped handles on the Knipex 97 52 08 result in a long lever arm. The pliers are also suitable for two-handed operation on large cable cross-sections. Special leverage is also integrated in the crimping pliers, so that even a low level of manual force gets to the end sleeve (ferrule) in a well reinforced and carefully measured way. The user can produce stable connections from conductors and end sleeves with little time and effort.
This is how it is done: three hand movements to produce a professional crimp connection
An insulated or non-insulated end sleeve is inserted. The lower handle is then pulled up using two fingers, until both jaws are resting on the plug connector to be crimped, thereby fixing it in the crimp profile. After inserting the stripped cable, crimping is carried out – accurately and permanently securely. The high Knipex quality standards and selection of materials with high-grade chrome vanadium electric steel ensure that all the qualities of these crimping pliers will last for a long time.
Particularly user-friendly crimping pliers with lever transmission
For insulated and non-insulated end sleeves (ferrules) with a capacity of 0.25 – 6.0 mm²
Long lever arm for one-handed and two-handed operation
Toggle lever system for high efficiency
Integral lock (with release mechanism) only triggers on reaching the optimal crimping pressure
Consistently high crimping quality due to (adjustable) crimping pressure calibration
Knipex quality standards guarantee ideal work results and a long service life
Firm grip in the hand thanks to ergonomic shape of the handle
Chrome high-grade vanadium electric steel; oil-hardened
Handles with non-slip plastic grips
Length 250 mm
Net weight 565 g
Positioning of end sleeve and conductor
An insulated or non-insulated end sleeve with a capacity of 0.25 – 6.0 mm² is inserted in the crimping die; the conductor is inserted.
Implementation of the crimping operation
Little physical effort is needed due to toggle lever transmission; the integral lock ensures the ideal crimping pressure.
Done. Secure crimp connection
The precision crimp profiles permit professional, mechanically and electrically safe and secure connections at all times.
For calibration inquiries, please contact our affiliated company RENNSTEIG WERKZEUGE GMBH under the following contact:
Mr. Uwe Wagner
Tel .: +49 36 847 441-59
Domestic sales
