주요 콘텐츠로 건너뛰기
Loading YT Video
KNIPEX
Quality — Made in Germany
KNIPEX 70 06 160 Seitenschneider
70 06 160
대각선 니퍼
길이: 160 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 70 06 180 Seitenschneider
70 06 180
대각선 니퍼
길이: 180 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 73 06 160 X-Cut® Kompakt-Seitenschneider hochübersetzt
73 06 160
KNIPEX X-Cut®
소형 다이애거널 커터 고 지렛대 원리
길이: 160 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 74 06 200 Kraft-Seitenschneider
74 06 200
고성능 니퍼
길이: 200 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 16 95 01 SB ErgoStrip® Universal-Abmantelungswerkzeug
16 95 01 SB
KNIPEX ErgoStrip®
만능 스트립퍼 오른손잡이 버전
길이: 135 mm
KNIPEX 16 80 125 SB Universal-Abmantelungswerkzeug
16 80 125 SB
만능 스트립퍼
길이: 125 mm
KNIPEX 13 86 200 Elektro-Installationszange
13 86 200
전기 설비용 플라이어
길이: 200 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 13 96 200 Elektro-Installationszange
13 96 200
전기 설비용 플라이어
길이: 200 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 26 16 200 Flachrundzange mit Schneide (Storchschnabelzange)
26 16 200
롱노우즈 플라이어
(새부리형 플라이어)
길이: 200 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 26 26 200 Flachrundzange mit Schneide (Storchschnabelzange)
26 26 200
롱노우즈 플라이어
(새부리형 플라이어)
길이: 200 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 95 16 165 Kabelschere
95 16 165
케이블 가위
길이: 165 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 95 16 200 Kabelschere mit Doppelschneide
95 16 200
케이블 가위
이중 커팅 엣지
길이: 200 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
95 36 280
케이블 가위
(라쳇 방식)
길이: 280 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 이중 안락 손잡이
KNIPEX 12 42 195 MultiStrip 10 Automatische Abisolierzange
12 42 195
KNIPEX MultiStrip 10
멀티스트립
길이: 195 mm
재료:  분말 코팅
핸들: 손잡이 슬리브 없음
KNIPEX 12 40 200 Selbsteinstellende Abisolierzange
12 40 200
자동 조정 절연 스트립퍼
길이: 200 mm
재료:  분말 코팅
핸들: 손잡이 슬리브 없음
KNIPEX 97 53 04 Selbsteinstellende Crimpzange für Aderendhülsen mit Seiteneinführung
97 53 04
엔드 슬리브(페롤)용 자동 조절 압착기
측면 로딩
길이: 180 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 이중 안락 손잡이
KNIPEX 97 53 09 Selbsteinstellende Crimpzange für Aderendhülsen mit Fronteinführung
97 53 09
엔드 슬리브(페롤)용 자동 조절 압착기
전면 로딩
길이: 190 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 이중 안락 손잡이
97 53 14
엔드 슬리브(페롤)용 자동 조절 압착기
측면 로딩
길이: 180 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 이중 안락 손잡이
KNIPEX 97 53 18 Twistor®16 Selbsteinstellende Crimpzange für Aderendhülsen mit drehbarem Crimpkopf
97 53 18
KNIPEX Twistor®16
엔드 슬리브(페롤)용 자동 조절 압착기 회전 가능한 압착 헤드
길이: 200 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 이중 안락 손잡이
KNIPEX 97 33 02 MultiCrimp® Crimpzange mit Wechselmagazin
97 33 02
KNIPEX MultiCrimp®
빠르게 교체 가능한 매거진이 장착된 압착 플라이어
길이: 250 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 이중 안락 손잡이
KNIPEX 97 52 36 PreciForce® Crimpzange
97 52 36
KNIPEX PreciForce®
압착 플라이어
길이: 220 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 이중 안락 손잡이
KNIPEX 97 52 38 PreciForce® Crimpzange
97 52 38
KNIPEX PreciForce®
압착 플라이어
길이: 220 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 이중 안락 손잡이
00 21 05 LE
공구함 "베이직"
비어있는
00 21 37
Robust45 Move 전자기기 공구함
KNIPEX 00 11 01 TwinKey® für gängige Schränke und Absperrsysteme
00 11 01
KNIPEX TwinKey®
컨트롤 캐비닛 키 모든 표준 캐비넷과 차단 시스템용
길이: 92 mm
KNIPEX 87 01 250 Cobra® Hightech-Wasserpumpenzange
87 01 250
KNIPEX Cobra®
최첨단 워터펌프 플라이어
길이: 250 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 플라스틱 코팅
00 50 10 T BK
낙하방지
길이: 900 mm
00 50 11 T BK
어댑터 스트랩
길이: 400 mm
00 50 12 T BK
카라비너가 고정되어 있는 테더
길이: 90 mm
00 50 13 T BK
카라비너가 고정되어 있는 어댑터 스트랩
길이: 186 mm
KNIPEX 87 01 125 Cobra® Hightech-Wasserpumpenzange
87 01 125
KNIPEX Cobra®
최첨단 워터펌프 플라이어
길이: 125 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 플라스틱 코팅
KNIPEX 87 01 150 Cobra® Hightech-Wasserpumpenzange
87 01 150
KNIPEX Cobra®
최첨단 워터펌프 플라이어
길이: 150 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 플라스틱 코팅
KNIPEX 87 01 180 Cobra® Hightech-Wasserpumpenzange
87 01 180
KNIPEX Cobra®
최첨단 워터펌프 플라이어
길이: 180 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 플라스틱 코팅
KNIPEX 87 01 300 Cobra® Hightech-Wasserpumpenzange
87 01 300
KNIPEX Cobra®
최첨단 워터펌프 플라이어
길이: 300 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 플라스틱 코팅
KNIPEX 86 01 250 Zangenschlüssel Zange und Schraubenschlüssel in einem Werkzeug
86 01 250
플라이어 렌치
하나의 공구로 플라이어와 렌치 사용
길이: 250 mm
재료:  흑색 처리 / 락카 착색 / 광택 처리
핸들: 플라스틱 코팅
KNIPEX 86 03 125 Zangenschlüssel Zange und Schraubenschlüssel in einem Werkzeug
86 03 125
미니 플라이어 렌치
하나의 공구로 플라이어와 렌치 사용
길이: 125 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 플라스틱 코팅
KNIPEX 86 03 150 Zangenschlüssel Zange und Schraubenschlüssel in einem Werkzeug
86 03 150
플라이어 렌치
하나의 공구로 플라이어와 렌치 사용
길이: 150 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 플라스틱 코팅
86 03 180
플라이어 렌치
하나의 공구로 플라이어와 렌치 사용
길이: 180 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 플라스틱 코팅
KNIPEX 86 03 250 Zangenschlüssel Zange und Schraubenschlüssel in einem Werkzeug
86 03 250
플라이어 렌치
하나의 공구로 플라이어와 렌치 사용
길이: 250 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 플라스틱 코팅
86 03 300
플라이어 렌치
하나의 공구로 플라이어와 렌치 사용
길이: 300 mm
재료:  크롬 도금/아연 도금/니켈 도금
핸들: 플라스틱 코팅

Where good tools become a matter of trust

Download

Which pliers are electrical pliers ?

Compared to most crafts, work on electrical systems has different requirements. Wherever electricity can flow, it is not just precise movements that count – but above all, very special efforts to protect the health of the electrician .

 

This is why the complex insulation is a special characteristic of electrical pliers .

 

There is just no way around carefully tested and high-quality tools such as those from KNIPEX. (see also: VDE pliers and ESD pliers )

 

Features of VDE pliers

The abbreviation VDE stands for the German "Association of Electrical Engineering, Electronics and Information Technology". The focus of this registered association is the development of VDE standards for the manufacture of tools . Since electricians are regularly exposed to possibly mortal dangers in their daily work, strict regulations with regard to an adequate insulation are essential.

 

The VDE also maintains a renowned testing institute. Products tested here by independent specialists feature the triangular VDE logo which certifies high quality and suitability for use. Although the “GS” mark given here to a new tool signals “tested safety”, every tool should be checked regularly for any damage that may occur in everyday work. After all, even a tiny cut or tear in the insulation can lead to the worst possible consequences.

 

But it is not only the topic of safety that presents developers of excellent electricians' tools with challenges. Precise crimping, stripping or cutting in particularly narrow working environments is only possible if the tool allows it. Small dimensions and special spring mechanisms are therefore extremely important in order to give electrical professionals the necessary scope and the greatest possible sensitivity.

 

 

Pliers for the electrical industry

The quality of a hand tool for electrical installation is primarily determined by whether it is possible to work precisely in the tightest of spaces. Slim handles and pliers heads are just as important as designs that provide sensitivity right up to the gripping jaws.

 

Compliance with special standards must also be guaranteed, for example by using VDE pliers. Relevant electrical tools include:

 

Gripping pliers such as flat-nose pliers and needle-nose pliers

The short and flat gripping jaws of flat-nose pliers have a roughened gripping surface, which makes it possible to securely grip and hold different workpieces. When the gripping surfaces taper towards the front, we speak of needle-nose pliers. Their special design helps you to reach through small openings.

 

Flat-nose pliers : The wide, roughened gripping jaws for greater holding force characterize flat-nose pliers. In the electrical sector they are used for holding and guiding for example cables, plugs and system parts.

Needle-nose pliers : With the pointed, roughened gripping jaws, needle-nose pliers can be used through small openings. They are also often used to bend wires.

 

 

Cutting pliers

Side cutters, electronic front cutters and electronic oblique cutters are considered indispensable classics. They are used to disconnect cables and cut connectors.

 

Compression tools

When it comes to making electrical connections, crimping tools offer a practical alternative to welding and soldering. Crimping is a special pressing technique in which plug contacts and cables are connected to one another by plastic deformation. Different versions of crimping dies are aimed at different pairings of plugs and cables.

 

The wire stripper: The wire stripper makes it possible to cut and remove cable insulations of different cross-sections. They are available with round, straight or V-shaped cutting openings, and as mechanical or automatic models. The main goal when using it is not to damage the stranded wires or wires behind it.