KNIPEX TwinForce® High Performance Diagonal Cutters
DIN ISO 5749
patented_s.gif

73 71 180 (online-normal)
73 71 180 zoom
pliers black atramentized, head polished, handles plastic coated


KNPK1311_gruen.gif (online-thumb)
73 72 180 (online-normal)
73 72 180 zoom
pliers black atramentized, head polished, handles with multi-component grips


KNPK1311_gruen.gif (online-thumb)
73 72 180 F (online-normal)
73 72 180 F zoom
pliers black atramentized, head polished, handles with multi-component grips


KNPK1311_gruen.gif (online-thumb) KNPK0121_Feder_s.gif (online-thumb)

  • The superior High-Leverage Diagonal Cutter with patented double joint
  • ideal transmission of force due to double-hinged design
  • reliably cuts all types of wire, including steel tape
  • for rough or very fine cutting
  • low cutting impact: gentle on hands. The tension on muscles and tendons is relieved
  • for comfortable cutting, repetitive cutting or extremely hard cutting jobs
  • high degree of stability and zero-backlash due to precisely milled forged-in axles
  • Chrome vanadium heavy-duty steel, forged, oil-hardened
    Model 73 72 180 F :
  • with opening spring to spimplify reapplication and for repetitive cutting

Extremely easy cutting with little strain:


cuts again 50 % easier than the tried and tested KNIPEX high leverage diagonal cutters

New for diagonal cutters:


The option to reapply the tool. The KNIPEX TwinForce® cuts even 4 mm thick wire without great effort when reapplied two or three times. Conventional high leverage diagonal cutters either cannot cut these diameters or only with very great effort.

7372180FH03D0.jpg
The high performance diagonal cutters with opening spring for easier reapplication and for heavy use

7372180FH01D0.jpg
The opening spring can be easily activated and deactivated by a press of the thumb

7372180H10D0.jpg
7371180H02D0.jpg
7372180H04D0.jpg
7372180H13D0.jpg
73_7_Animation1D0.jpg
Insert the wires as close to the hinge as possible. In case of cutters with very high transmission, the width of the gap between the cutting edges close to the fulcrum may be less than the thickness of the wire. Wires may slip forward when the cutting starts.

73_7_Animation2D0.jpg
First make a notch in the wire using the KNIPEX TwinForce® until the required hand force increases considerably. Now open the pliers and slide the wire backwards towards the joint. Hold the cutting edge in the notches you have made in step 1.

73_7_Animation3D0.jpg
Continue cutting in the same location along the wire. Now cutting is much more easier because the wire remains in place closer to the fulcrum.

73_7_Animation4D0.jpg
You can repeat this process if necessary.



Article No.EAN
4003773-
Cutting capacities soft wire (diameter)
Ø mm
Cutting capacities medium hard wire (diameter)
Ø mm
Cutting capacities hard wire (diameter)
Ø mm
Cutting capacities piano wire (diameter)
Ø mm
Length
mm
Net weight
g
73 71 1800747625,54,603,203,00180255
73 72 1800747795,54,603,203,00180280
73 72 180 F0776575,54,603,203,00180280
technical change and errors excepted